Power Supplies

The NCN series is a low voltage power supply, engineered with the latest technology. Of the NCN series, 6 different models are available with power ratings of 1250, 2500 or 5000 Watts . The output voltages are 0 to 30 or 0 to 50V.                                                                                                                

The MCP series is the successor of the MCL and the MCN series without making consessions to quality and user friendliness. 42 different models are available, with adjustable output voltages from 0 and 2.000 Volts and power ratings from 35 to 4.200 Watt. These power supplies have floating outputs;  the negative or the positive output can be connected to ground.                        

The HCP series is new after the successful HCL en HCN high voltage units. Of this series a vast number of 52 models are available, so there will always be one which fits your HV application. Output voltages are adjustable from 0 to 150.000 Volts with powers up to 4.200 watt. The HCP serie is optionally equipped with electronic polarity reversal up to 35 kilovolts.

All FuG power supplies can be controlled local as well as remote by means of digital RS 232; RS 485 en/of IEEE RS422, USB and LAN interfaces. Of course analog control is also possible.

The TopCon Quadro power supply series offers full output control (0…100%) of voltage, current and power as well as an adjustable internal resistance simulation. In order to compensate the voltage drop on the line from the power supply to the load, a sense line can be connected. All models are equipped with a remote sense terminal as standard. The models cover the voltage range from 0…52 up to 0…1000 VDC with finely graduated nominal output voltages. Power categories of 10, 16, 20 and 32 kW are available for each nominal output voltage.

All the numerous advantages of compactness, robustness, reliablilty and saving offered with the double resonance technology are already available on these models which constitute the low end range. 5 series of power are offered: 300W, 600W, 1200W, 1500W and 3000W.  These generators are all based on a 3U height, 19″ rack presentation. Using a modular design, our products integrate the latest technology components. Above 20kV, the HV subassembly is immersed in resin.

Double resonance Technology operating at high frequencies (50kHz) offers a smooth switching to all critical components and provides them with a non stressing behaviour. Internal power dissipation, harmonics and ripple are significantly reduced. Hence the generators can intensively operate with no failure even in rugged environments. Many are used at full power 24/7 , with no failure for many years. 4 series of power are offered from 5.000W to 10.000 W.
Above 24kV, the HV subassembly is immersed in a tank containing mineral oil. With its low cost per Watt, this series is particularly well adapted in applications for power and performance at affordable prices.

HMP4040 Programmable 4 Channel High-Performance Power Supply 4 x 0…32V/0…10A 384W max. 384 W Output Power realized by intelligent Power Management Low Residual Ripple: <150μVrms due to linear Post Regulators High Setting- and Read-Back Resolution of 1 mV up to 0.2mA Keypad for direct Parameter Entry Galvanically isolated, earth-free and short circuit protected Output Channels Advanced Parallel- and Serial Operation via V/I Tracking EasyArb Function for free definable V/I Characteristics FuseLink: Individual Channel Combination of Electronic Fuses Free adjustable Overvoltage Protection (OVP) for all Outputs All Parameters clearly displayed via LCD/Glowing Buttons Rear Connectors for all Channels including Sense USB/RS-232 Interface, optional Ethernet/USB or IEEE-488 (GPIB).

HM7042-5  Triple Power Supply Unit 2 x 0…32V/0…2A 1 x 0…5.5V/0…5A High-Performance and inexpensive Laboratory Power Supply Floating, overload and short-circuit proof Outputs Separate Voltage and Current Displays for each Output, 4 Digits at Channel 1+3; 3 Digits at Channel 2 Display Resolution: 10mV/1mA at Channel 1+3; 10mV/10mA at Channel 2 Protection of sensitive Loads by Current Limit or Electronic Fuse Pushbutton for Activating/Deactivating all Outputs Low Residual Ripple, high Output Power, very good Regulation Parallel (up to 9A) and Series (up to 69.5V) Operation Temperature-controlled Fan

01-01-2012

• Amplifiers
• EMC
• Filters
• Frequency Synthesizers
• General Purpose Test
• High Voltage Components
• High Voltage Power Solutions
• High Voltage Test Equipment
• Lighting Applications
• Microwave Noise Source Generators
• Mixers
• Monitoring Sensors
• Oscillators & Synthesizer Modules
• Power Supplies
• Power Supply Test Systems
• Satellite & Telecommunications
• Waveguide Components

• WENZEL’s ONYX IV Crystal Oscillator

  
  
  The ONYX IV is a small lightweight ruggedized OCXO featuring low phase noise (-165 dBc/Hz, standard), good temperature stability and low g-sensitivity (to <3E-10/g, typical). Designed for military PCB mount applications to provide excellent phase noise performance during vibration.
  
  

• IEC61000 ?

  Introducing the Complete pre-compliance harmonics & flicker test solution
  
  
  
  
  
  
  
  As a manufacturer are you seeing additional money being spent on expensive re-tests at EMC laboratories for certification to the latest IEC61000-3-2 harmonics and IEC61000-3-3 flicker standard?
  more...