Air-Parts BV has the pleasure to introduce the newest AC/DC Power Source from GW-Instek: the ASR-2000 series.

This power source provides both rated power output for AC output and rated power output for DC output and can be used in applications such as electronic products / electronic component development test; automotive electrical device simulation test and household appliance application test.

There are nine different output modes and three different waveform output capabilities available to meet the test requirements.

When the ASR-2000 series power source outputs, it can also measure all relevant electrical parameters. In addition, the Remote sense function ensures accurate voltage output. The Customized Phase Angle for Output On/Off function can set the starting angle and ending angle of the voltage output according to the test requirements.

Programmable safety parameters and functions such as V-Limit, Ipeak-Limit, F-Limit, OVP, OCP, OPP can protect the DUT during the measurement process. In addition to OTP, OCP, and OPP protection, the ASR-2000 series also incorporates the Fan fail alarm function and AC fail alarm function.

The front panel of the ASR-2050/2100 provides a universal socket or a European socket, which allows users to plug and use so as to save wiring time.

The ASR-2050R/2100R is 3U height and 1/2 Rack width design, which is compatible with ATS assembly.

To use the ASR-2000 series remotely, it supports I/O interface and is equipped with USB, LAN, External I/O and optional RS-232C and GPIB.

The most important features are:

  • Output Rating: AC 0 – 350 Vrms, DC 0 – ± 500 V
  • Output Frequency up to 999.9 Hz
  • DC Output (100% of Rated Power)
  • Measurement Items: Vrms, Vavg, Vpeak, Irms, IpkH, Iavg, Ipeak, P, S, Q, PF, CF
  • Voltage and Current Harmonic Analysis(THDv, THDi)
  • Remote Sensing Capability
  • OVP, OCP, OPP, OTP, AC Fail Detection and Fan Fail Alarm.
  • Support Arbitrary Waveform Function
  • Output Capacity: 500VA/ 1000VA
  • Customized Phase Angle for Output On/Off
  • Sequence and Simulation Function(up to 10 sets)
  • Interface: USB, LAN(std.); RS-232+GPIB(opt)
  • Built-in External Control I/O and External Signal Input
  • Built-in Output Relay Control
  • Memory Function (up to 10 sets)
  • Built-in Web Server